[. . . ] Do not touch the bulb which is hot in use or immediately after putting on light. Model Bulb L Dimensions Net weight (without battery) W H BML145 12 V 0. [. . . ] When the tool is not in use, always switch off and remove the battery cartridge from the tool. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). If you leave the lamp switched on, the battery cartridge capacity may decrease. Do not disassemble the charger or battery cartridge; take it to a qualified serviceman when service or repair is required. If any problem develops, consult your nearest Makita Service Center or dealer. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service Center. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center. Always switch off the tool before insertion or removal of the battery cartridge. ⷠTo remove the battery cartridge, withdraw it from the tool while sliding the button on the front of the cartridge. ⷠTo insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If you can see the red part on the upper side of the button, it is not locked completely. [. . . ] The accessories or attachments should be used only in the proper and intended manner. ⷠThis tool has function that bulb light goes out at low voltage. [. . . ]